Stent cutting is a process of cutting in microns a very fine mesh type profile on an ultra-thin walled metal tube. It needs the utmost precision and utmost level of symmetry. Stent Beat is a Fiber-laser based stent cutting machine, which delivers maximum accuracy and ensures the best cutting edge finish by minimizing defects such as the heat-affected zone, micro-cracks and welds. This machine is constructed from an accurately polished Granite structure with a welded single-piece steel frame that ensures absolute rigidity and performance consistency. It is designed with an automatic tube feeding mechanism and is compatible for carrying out both dry and wet cutting of stent. Smartly harmonized high-performance standard laser coupled with a direct drive motion system and advanced control architecture delivers a high level of precision-cut under very tight stent profile and minimal geometry errors. Besides, various stent profiles can be quickly set with advanced and operator-friendly software.
: | 0.5 mm to 7.9 mm for Dry Cutting | |
: | 0.5 mm to 3.0 mm for Wet Cutting | |
: | Maximum 3000 mm | |
: | Linear axis-300 mm/s , Rotary axis- 600 rpm | |
: | Linear axis- 100 mm, Rotary axis-3600continuous | |
: | Linear axis- ± 2 µm, Rotary axis ± 25 arcsec | |
: | Linear axis- ± 0.2 µm, Rotary axis ± 4 arcsec | |
: | Fibre | |
: | 100 Watt | |
: | 1070 ± 10 nm | |
: | < 3 % | |
: | < 1.1 (nominal) | |
: | Random | |
: | 0.8 MPa to 1.0 MPa | |
: | < 2 MPa | |
: | 1Ø, 220 VAC 50/60 Hz or 110 VAC 50/60 Hz | |
: | 1500 Watt | |
: | 1200 mm (L) x 800 mm (W) x 1275 mm (H) | |
: | 650 Kg |
©2023 Narola Machines. All Rights Reserved. | Terms & Conditions | Privacy Policy